Home
>
products
>
Electrical Insulating Epoxy Resin
>
|
|
| Place of Origin | HUBEI, CHINA |
| Brand Name | JT |
| Certification | ISO |
| Model Number | JT8053A&B |
Voltage Transformers Epoxy Resin Used In Electrical High Voltage Power Insulation Products
TDS:
| EPOXY RSIN | JT 8053 A | 100 pbw |
| HARDENER | JT 8053 B | 90 pbw |
| SILICA POWDER | FILLER | 360 pbw |
Industrial hygiene
When operating and processing products, must follow the industrial hygiene standards.
For more information, please refer to the corresponding safety data sheet and
Operating protection measures
Workplace safety measures:
Protective clothing Need
Gloves Must need
Arms to protection May contact with the skin, Recommended
Goggles/safety glasses Need
Mask/dust mask Recommended
Skin protection:
Before working To exposed skin protection by cream
After washing Frost of besmear protective cream or nutrition
Contamination of the skin clean With suction paper wipe, wash with warm water and alkali free soap, With a one-time towel dry. Do not use solvents.
Clean workshop environment Use a light paper covering the table and chairs. Using a disposable beaker, etc. Spatter material processing Use sawdust or waste cotton silk blotting, and placed in a plastic woven baskets.
Ventilation:
To workshop Take a breath three to five times per hour.
To position Cover of exhaust fan. The operator should avoid inhalation of vapour.
PRODUCT NAME:
EPOXY RESIN FOR LBS, BUSHINGS, SPOUTS, MONOBLOCK, SWITCH GEARS, EMBEDDED POLES, INSULATORS
TDS:
Characteristics:
Strong adhesion
Good insulation
Good process performance
Good surface gloss and electrical resistance
Excellent moisture resistance
1. Appearance& Characteristics:
| Item | Color | Viscosity@25℃(mPa·s) | Density@25℃( g/cm3 ) |
| JT8053A Epoxy resin | clear liquid | 1000-3000 | 1.00-1.20 |
| JT8053B Hardener | Yellowish liquid | 10-80 | 0.90-1.00 |
2. Mixing ratio: JT2051A/JT2051B=4/1(pbw)
3. Applicable time: 25-40mintus at 25℃( mixture: 100g)
4. Curing condition: 8-12h@25℃ or 6h@60℃, full curing takes 3days at Room temperature.
5. Process:
Mixing two components in a certain proportion and keep it for 10minutes, brush them to the iron core after the viscosity is increasing.
6. Properties:
| Hardness(Shore D) | 70-80 |
| Bending strength (MPa) | 30-50 |
| Impact strength (kJ/m2) | 20-40 |
| Dielectric strength (kV/mm) | 10-15 |
| Volume resistivity (W·cm) | >1013 |
7. Packing:
Component A: 24kg
Component B: 6kg
8. Storage
The product should be sealed in the original packaging container, stored in a dry and ventilated place to save. The shelf life is 6 months under 18~40℃ condition . If exceeds the shelf life time, it needs to be tested again to confirm whether it can be used or not.
Client Product:
Equipment used by customers:
Hubei Plant and Guangdong Plant:
ISO certifcate:
Part of our customers:
FAQ:
1. What’s the Pre-filled?
Pre-filled is the resin or hardener has been filled with silica sands before delivering to you.
2. Is Pre-filled resin cheaper than Pure resin?
Generally it is. However, you should consider the final cost. If you can find qualified silica sands in you local market, the pure resin is better choice. Silica sands are very cheap, sea freight cost is high. With same quantity of resin in a shipment, you can get more final mixed resin with local silica sands.
3. Why JiangTe resin doesn’t offer Flexibilizer and Accelerator?
We’ve added them into resin/hardener already before delivering to you. So you can use our materials easily
Contact Us at Any Time
