Resin Mould Release Agent Fast Curing For Lubrication Electrical Insulator

Release agent for lubrication on electrical insulator molds

PRODUCT MSDS:

 

 

1. IDENTIFICATION

Commodity name: JT6101A demoulding agent

Company Name: HUBEI JIANGTE INSULATION COMPOSITE CO., LTD.

Add: Room219 Zhanghua Road(N), EDA Qianjiang City, Hubei Province, China

Tel:+86-728-6201068

Fax:+86-728-6202066

Zip code:433132

 

 

2. HAZARDS IDENTIFICATION

Flammable

Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

Harmful: may cause lung damage if swallowed.

Repeated exposure may cause skin dryness or cracking.

 

 

3. COMPOSITON INFORMATION ON INGREDIENT

Chemical Name	Trade names and Synonyms	CAS No.	Content(%)
Tetrakis(trimethylsilyl) silicate	Modified polyorganosiloxane	3555-47-3	20.00 – 30.00
Light aromatic solvent naphtha	Solvent naphtha (petroleum) light arom	64742-82-1	70.00 – 80.00

 

 

4. FIRST AID MEASURES

A. Eye contact

- Do not rub your eyes.

- Immediately flush eyes with plenty of water for at least 15minutes and call a doctor/physician.

 

B. Skin contact

- Flush skin with plenty of water for at least 15minutes while removing contaminated clothing and shoes.

- Laundering enough contaminated clothing before reuse.

- Go to hospital immediately if symptoms(flare, irritate) occur.

- Wash thoroughly after handling.

 

C. Inhalation contact

- When exposed to large amounts of steam and mist, move to fresh air.

- Take specific treatment if needed.

 

D. Ingestion contact

- About whether I should induce vomiting. Take the advice of a doctor.

- Rinse your mouth with water immediately.

 

E. Delayed and immediate effects and also chronic effects from short and long term exposure

- Not available

 

F. Notes to physician

- Notify medical personnel of contaminated situations and have them take appropriate protective measures.

 

 

5. FIRE-FIGHTING MEASURES

A. Suitable (Unsuitable) extinguishing media

- Dry chemical, carbon dioxide, regular foam extinguishing agent, spray

- Avoid use of water jet for extinguishing

 

B. Specific hazards arising from the chemical

- Not available

 

C. Special protective actions for firefighters

- Notify your local firestation and inform the location of the fire and characteristics hazard.

- Using a unattended and water devices in case of large fire and leave alone to burn if you do not imperative.

- Avoid inhalation of materials or combustion by-products.

- Do not access if the tank on fire.

- Use appropriate extinguishing measure suitable for surrounding fire.

- Keep containers cool with water spray.

- Vapor or gas is burned at distant ignition sources can be spread quickly.

 

 

6. ACCIDENTAL RELEASE MEASURES

A. Personal precautions, protective equipment and emergency procedures

- Must work against the wind, let the upwind people to evacuate.

- Move container to safe area from the leak area.

- Remove all sources of ignition.

- Do not direct water at spill or source of leak.

- Avoid skin contact and inhalation.

 

B. Environmental precautions

- Prevent runoff and contact with waterways, drains or sewers.

- If large amounts have been spilled, inform the relevant authorities.

 

C. Methods and materials for containment and cleaning up

- Large spill : Stay upwind and keep out of low areas. Dike for later disposal.

- Notification to central government, local government. When emissions at least of the standard amount

- Dispose of waste in accordance with local regulation.

- Appropriate container for disposal of spilled material collected.

- Small leak: sand or other non-combustible material, please let use absorption.

- Wipe off the solvent.

- Dike for later disposal.

- Prevent the influx to waterways, sewers, basements or confined spaces.

 

 

7. HANDLING AND STORAGE

A. Precautions for safe handling

- Wash thoroughly after handling.

- Avoid direct physical contact.

- Avoid contact with incompatible materials.

- Refer to Engineering controls and personal protective equipment.

- Do not inhale the steam prolonged or repeated.

 

B. Conditions for safe storage, including any incompatibilities

- Do not use damaged containers.

- Do not apply direct heat.

- Save applicable laws and regulations.

- Avoid direct sunlight.

- Keep in the original container.

- Collected them in sealed containers.

- Do not eat, drink or smoke when using this product.

- Store away from water and sewer.

 

 

8. OPERATION DISPOSAL AND STORAGE

Note: closed/sealed operation, provide good natural ventilation condition. The operator must go through specialized training, strictly follow the operating rules. We suggest that the operating personnel wearing Self suction filtering type dust mask, and wearing protective chemical safety glasses.

Storage note: dry and ventilated

 

 

9. PHYSICAL AND CHEMICAL PROPERTIES

-Appearance
a. Appearance	Liquid
b. Color	Colourless
Odor	Solvent
-PH	Approx.5 (at 20℃, 1:1 in water)
-Flash point	³ 40 ℃
-Density	0.85-0.95 g/cm3 (at 25℃)
-Viscosity	1-40 mPa.s(at 25℃)

 

 

10. STABILITY AND REACTIVITY

A. Chemical Stability and Reactivity

- This material is stable under recommended storage and handling conditions.

 

B. Possibility of hazardous reactions

- Hazardous Polymerization will not occur.

 

C. Conditions to avoid

- Avoid contact with incompatible materials and condition.

- Avoid Accumulation of electrostatic charges, Heating, Flames and hot surfaces.

 

D. Incompatible materials

- Not available

 

E. Hazardous decomposition products

- May emit flammable vapour if involved in fire.

 

 

11. TOXICOLOGICAL INFORMATION

Acute oral toxicity : LD50 rat

Dose: > 2,000 mg/kg

Eye irritation : irritating rabbit

Method: Data based on tests on similar product.

Skin irritation: irritating rabbit

Method: Data based on tests on similar product.

dermal

Sensitization: Causes sensitization. Guinea pig

Method: Data based on tests on similar product.

Dermal

 

 

12. ECOLOGICALINFORMATION

Ecological toxicity: unknown

Biological degradation: unknown

Non biological degradation: unknown

 

 

13. DISPOSAL CONSIDERATIONS

A. Disposal methods

- Since more than two kinds of designed waste is mixed, it is difficult to treat separately, then can be reduction or stabilization by incineration or similar process.

- If water separation is possible, pre-process with Water separation process.

- Dispose by incineration.

- Incinerate the oil by separating the oil and water

- The remainder of the water after separation will be processed in a water pollution prevention facilities.

- Do incineration or stabilization of the residue after disposal as the method of evaporation and concentration.

- Do incineration of the residue after disposal as the method of agglomeration and precipitation.

- Take care of incinerate or stabilization after treatment, purified by means of Separation distillation extraction filtration pyrolysis

 

B. Special precautions for disposal

- The user of this product must disposal by oneself or entrust to waste disposer or person who other’s waste recycle and dispose, person who establish and operate waste disposal facilities.

- Dispose of waste in accordance with all applicable laws and regulations.

 

 

14. TRANSPORT INFORMATION

DOT (US)

UN-Number: 1993

Class: 3

Packing group: III

Proper shipping name: FLAMMABLE LIQUID

Marine pollutant: No Poison

Inhalation Hazard: No

 

IMDG

UN-Number: 1993

Class: 3

Packing group: III

EMS-No: F-E S-E

Proper shipping name: FLAMMABLE LIQUID

Marine pollutant: No

 

IATA

UN-Number: 1993

Class: 3

Packing group: III

Proper shipping name: FLAMMABLE LIQUID

 

Transport note: checking the packaging container whether complete and sealed or not before transport, make ensure that the container does not leak, do not collapse, not falling, not damaged. Mixing packing and transport with oxidant and food chemicals is prohibited. Transport vehicle must be thoroughly cleaned, disinfected, otherwise it can not load other goods. When loading, the assemble location should be far away from the bedroom, kitchen, and separate from engine room, power supply, fire and other parts. Highway transport need to follow the regulations and drive as per stipulated route

 

 

 

15. REGULATORY INFORMATION

National legislation

Flammable

Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

Harmful: may cause lung damage if swallowed.

Repeated exposure may cause skin dryness or cracking.

 

Notification status : EINECS yes

: TSCA yes

: DSL yes

: INV (CN) yes

: KECI (KR) yes

: JEX (JP) yes

 

16. OTHER INFORMATION

A. Reference

- The information contained herein is believed to be accurate. It is provided independently of any sale of the product for purpose of hazard communication. It is not intended to constitute performance information concerning the product. No express warranty, or implied warranty of merchantability or fitness for a particular purpose is made with respect to the product or the information contained herein.

 

B. Last date revised

- 2017-01-10

 

C. Other

- This SDS is prepared according to the Globally Harmonized System (GHS).

                                                                                                                                                                                                               

Using objects: